How to use the nectar collector?

How to use the nectar collector?

Familiarize yourself with the components:

Identify the various parts of the nectar collector, including the tip used for placing concentrates (typically made of titanium, quartz, or ceramic), the glass or silicone body that can be held, the mouthpiece, and sometimes a water chamber for filtration.

Preparation:

Add an appropriate amount of water to the nectar collector’s water chamber to filter and cool the vapor. Place the concentrate in a food-grade silicone or glass concentrate container.

Heat the tip:

Use a small butane torch to heat the tip, heating it for about 40 to 50 seconds, depending on the torch power, tip material, and desired temperature. Rotate the tip evenly during heating to ensure uniform distribution of heat.

Cool the tip:

 After heating, allow the tip to cool for a moment to avoid excessively high temperatures that could cause the concentrate to burn or produce harmful substances.

Inhale the concentrate:

Once the tip reaches the right temperature, gently touch it to the concentrate in the container and inhale lightly through the mouthpiece, causing the concentrate to vaporize and enter the mouth via the straw.

Cleaning and maintenance:

After use, let the device cool down, disassemble it and soak the tip and body in isopropyl alcohol for cleaning. Alternatively, use a cotton swab to clean any remaining concentrate from the tip to maintain the device’s performance and hygiene.